Specifications
1.20-30% power saving
2.30 years of experience
3. ISO & CE Certification
4. Efficiency Furnace
5. Energy-saving
Introductions:
Referring to and integrated advantages of IF Melting Furnace both domestically and internationally and based on the principle of rational structure, advanced technology, practical and reliable and easy repairing, we developed the Constant Power Digit-Control IF Electric Furnace. It has obvious effect on energy-saving comparing to Common Cable Line which can save the power consumption around 5%; Since there is less connecting line, the failure rate can be reduced by 90%, which is simple for debugging or repairing.
Features and Advantages
(1)Faster heating speed, uniform melting temperature, less Oxidation loss, uniform metal components
(2)Can be melt directly from Cold Furnace, easy for variety replacement
(3)Exquisite coil design, superior thick-walled copper cube together with reasonable interims, make the induction coil will works with highest convention efficiency and lowest resistivity, which will concentrate more power for heating and melting; With high intensity, it's not easy for coils be damaged by Electric Arc or Expansion Force.
(4)The Support System make each circle and each turn of the coil strong and firm, which will ease the possibility of In-turn Short Circuit and over the Electromagnetic Impetus, thus to greatly increase the service age for furnace liner.
· Electrical Feature:
1. Digital CMOS chip (U. S. ASIC-2-12), with the highest degree of integration at home, is used in control circuit, the overall machine controlled through one single panel;
2. Frequency-sweep zero voltage start, high success rate, no shock;
3. Automatic resistance adjustment, permanent power output, 10-20% energy saved in comparison with domestic traditional machine of the type;
4. Auto phase sequence adaptation, free of synchronization;
5. Good performance in reload staring, auto recovery;
6. Highly integrated in controlling circuit, free of use of high-rate starter and relay loop, fairly low failure rate;
7. Wholly digital design, strong in anti-interference, no temperature shift when in continuous working;
8. Multi-protection functions (for over current, over voltage, insufficient water pressure, power failure, or phase absence), and mishandling will not cause damage to machine
| Type |
Rated capacity (t) |
Rated power (KW) |
Reted frequency (kHz) |
Rated operational power (V) |
Steelmaking |
Ironmaking |
Cooling water consumption |
| ºC |
KW*h/t |
t/h |
ºC |
KW*h/t |
t/h |
t/h |
| GW0.15−100−1 |
0.15 |
100 |
1 |
700 |
1600 |
800 |
0.13 |
1450 |
780 |
0.13 |
6 |
| GWO.25−160−1 |
0.25 |
160 |
1 |
700 |
780 |
0.22 |
730 |
0.22 |
8 |
| GW0.5−250−1 |
0.50 |
250 |
1 |
1400 |
760 |
0.33 |
690 |
0.36 |
10 |
| GW0.75-350-1 |
0.75 |
350 |
1 |
1400 |
730 |
0.48 |
670 |
0.52 |
10 |
| GW1−500−1 |
1 |
500 |
1 |
1400 |
680 |
0.75 |
620 |
0.8 |
12 |
| GW1.5−750−1 |
2 |
750 |
1 |
1400 |
650 |
1.15 |
590 |
1.3 |
20 |
| GW2−1000−0.5−1 |
2 |
1000 |
0.5−1 |
2000 |
640 |
1.55 |
580 |
1.7 |
30 |
| GW2−1250-0.5-1 |
2 |
1250 |
0.5−1 |
2000 |
630 |
2 |
550 |
2.3 |
32 |
| GW2−1500−0.5−1 |
2 |
1500 |
0.5−1 |
2000 |
630 |
2.2 |
550 |
2.7 |
35 |
| GW3-1500−0.2−0.5 |
3 |
1500 |
0.2−0.5 |
2000 |
620 |
2.4 |
550 |
2.7 |
35 |
| GW3−1750−0.2−0.5 |
3 |
1750 |
0.2−0.5 |
2000 |
620 |
2.8 |
550 |
3.3 |
38 |
| GW3−2000−0.2−0.5 |
3 |
2000 |
0.2−0.5 |
2000 |
610 |
3.2 |
550 |
3.6 |
45 |
| GW3−2500−0.2−0.5 |
3 |
2500 |
0.2−0.5 |
2000 |
600 |
4.1 |
540 |
4.6 |
50 |
| GW5-2500−0.2−0.5 |
5 |
2500 |
0.2−0.5 |
2000 |
600 |
4.1 |
540 |
4.6 |
60 |
| GW5−3000−0.2−0.5 |
5 |
3000 |
0.2−0.5 |
2000 |
570 |
5.1 |
520 |
5.8 |
65 |
| GW7−3000−0.2−0.5 |
7 |
3000 |
0.2−0.5 |
2000 |
585 |
5.2 |
535 |
5.6 |
70 |
| GW7−3500−0.2−0.5 |
7 |
3500 |
0.2−0.5 |
2000 |
575 |
5.3 |
535 |
6.5 |
70 |
| GW8−4000−0.2−0.5 |
8 |
4000 |
0.2−0.5 |
2000 |
565 |
7.1 |
515 |
7.8 |
80 |
| GW8−5000−0.2−0.5 |
8 |
5000 |
0.2−0.5 |
2000 |
555 |
9 |
505 |
9.9 |
100 |
| GW10−5000−0.2−0.5 |
10 |
5000 |
0.2−0.5 |
2000 |
555 |
9 |
515 |
9.9 |
120 |
| GW10−6000−0.2−0.5 |
10 |
6000 |
0.2−0.5 |
2000 |
545 |
11 |
505 |
11.8 |
130 |
| GW12−6000−0.2−0.5 |
12 |
6000 |
0.2−0.5 |
2000 |
545 |
11 |
505 |
11.8 |
150 |
| GE12−8000−0.2−0.3 |
12 |
8000 |
0.2−0.3 |
2000 |
535 |
15 |
500 |
16 |
160 |
| GW15−8000−0.2−0.3 |
15 |
8000 |
0.2−0.3 |
2000 |
535 |
15 |
500 |
16 |
180 |
| GW20−10000−0.2 |
20 |
10000 |
0.2 |
2000 |
525 |
19 |
495 |
20 |
200 |
Audited Supplier 
){kind=link}